A newer version of IMDG is available.

View latest

Want to try Hazelcast Platform?

We’ve combined the in-memory storage of IMDG with the stream processing power of Jet to bring you the all new Hazelcast Platform.

Advanced Network Configuration

4.2 4.1 4.0 3.12 3.11 3.10 3.9 3.8 3.7 3.6 3.5

With the default configuration, Hazelcast members use a single server socket for all kinds of connections: cluster members, Hazelcast clients implementing the Open Binary Client Protocol and HTTP protocol clients connect to a single server socket that handles all the protocols.

You can also configure the Hazelcast members with separate server sockets using a different network configuration for different protocols. This configuration scheme allows more flexibility when deploying Hazelcast as described in the following cases:

  • For security, it is possible to bind the member protocol server socket on a protected internal network interface, while the client connections can be established on another network interface accessible by the Hazelcast clients.

  • Different kinds of network connections can be established with different socket options. For example varying send/receive window size to optimize the network usage, TLS for connections over WAN while member-to-member connections may remain unencrypted, etc.

In the following example we introduce the advanced network configuration for a member to listen for member-to-member connections on the default port 5701 while listening for client connections on the port 9090:

        Config config = new Config();
        config.getAdvancedNetworkConfig().setEnabled(true);
        config.getAdvancedNetworkConfig().setClientEndpointConfig(
                new ServerSocketEndpointConfig().setPort(9090)
        );
        HazelcastInstance instance = Hazelcast.newHazelcastInstance(config);
        System.out.println(instance.getCluster().getLocalMember().getAddressMap());

Running this example prints something similar to the following output, indicating that the member listens for the specified protocols on the respective configured ports:

{EndpointQualifier{type='CLIENT'}=[10.212.134.156]:9090, EndpointQualifier{type='MEMBER'}=[10.212.134.156]:5701}

The following is the equivalent declarative configuration:

  • XML

  • YAML

<hazelcast>
    ...
    <advanced-network enabled="true">
        <member-server-socket-endpoint-config>
            <port>5701</port>
        </member-server-socket-endpoint-config>
        <client-server-socket-endpoint-config>
            <port>9090</port>
        </client-server-socket-endpoint-config>
    </advanced-network>
    ...
</hazelcast>
hazelcast:
  advanced-network:
    enabled: true
    member-server-socket-endpoint-config:
      port:
        - 5701
    client-server-socket-endpoint-config:
      port:
        - 9090

Setting Up Cluster Members for Advanced Network Configuration

Advanced network configuration and single-socket network configuration are mutually exclusive: either an enabled AdvancedNetworkConfig or the NetworkConfig object is used to configure a member’s networking, including the joiner, discovery, failure detectors, etc. as described in the previous sections of this chapter.

You cannot define both elements in the declarative configuration, i.e., the network and advanced-network elements cannot be configured at the same time. In the programmatic configuration, an enabled AdvancedNetworkConfig takes precedence over the NetworkConfig. AdvancedNetworkConfig is disabled by default, therefore the unisocket member configuration under NetworkConfig is used in the default case.

When using the advanced network configuration, the following configurations are defined member-wide:

  • Joiner and cluster discovery (Multicast, TCP/IP, AWS, Azure, GCP, Kubernetes, Eureka, etc.)

  • MemberAddressProvider configuration

  • Failure detector configuration

In addition to the above, the advanced network configuration allows the configuration of multiple endpoints: each endpoint configuration applies for a specific protocol, e.g., MEMBER and CLIENT. An additional optional identifier can be configured to separate the configuration of multiple WAN protocol endpoints.

The supported protocols are as follows:

  • MEMBER: A member server socket is required for Hazelcast to operate. The default advanced network configuration defines a member endpoint configuration listening on port 5701 (same as the single-socket Hazelcast member configuration).

  • CLIENT: A single server socket handling the Hazelcast Open Binary Client Protocol can be optionally configured. If no such endpoint is configured, then the clients will not be able to connect to the Hazelcast member.

  • REST: A REST server socket is optional.

  • MEMCACHE: When accessing a Hazelcast cluster over the Memcache text protocol, an endpoint listening to MEMCACHE protocol must be defined.

  • WAN: Multiple WAN endpoint configurations can be defined to determine the network settings of outgoing connections (from the members of a source cluster to the target WAN cluster members) or to establish server sockets on which a target WAN member can listen for the incoming connections from the source cluster.

Server Socket Endpoint Configuration

The server socket endpoint configuration is common for all protocols. The elements comprising a server socket endpoint configuration are identical to their single-socket network configuration counterparts.

The following declarative configuration example includes all the common server socket endpoint elements:

  • XML

  • YAML

<hazelcast>
   ...
   <advanced-network enabled="true">
       <member-server-socket-endpoint-config>
           <port auto-increment="true" port-count="100">5701</port>
           <outbound-ports>
               <ports>33000-35000</ports>
               <ports>37000,37001,37002,37003</ports>
               <ports>38000,38500-38600</ports>
           </outbound-ports>
           <interfaces enabled="true">
               <interface>10.10.1.*</interface>
           </interfaces>
           <ssl enabled="true">
               <factory-class-name>com.hazelcast.examples.MySSLContextFactory</factory-class-name>
               <properties>
                   <property name="foo">bar</property>
               </properties>
           </ssl>
           <symmetric-encryption>
               <algorithm>ALGO</algorithm>
               <salt>SALT</salt>
               <password>PASS</password>
               <iteration-count>10000</iteration-count>
           </symmetric-encryption>
           <socket-interceptor enabled="true">
               <class-name>com.hazelcast.examples.MySocketInterceptor</class-name>
               <properties>
                   <property name="foo">bar</property>
               </properties>
           </socket-interceptor>
           <socket-options>
               <buffer-direct>true</buffer-direct>
               <tcp-no-delay>true</tcp-no-delay>
               <keep-alive>true</keep-alive>
               <connect-timeout-seconds>64</connect-timeout-seconds>
               <send-buffer-size-kb>25</send-buffer-size-kb>
               <receive-buffer-size-kb>33</receive-buffer-size-kb>
               <linger-seconds>99</linger-seconds>
           </socket-options>
           <public-address>dummy</public-address>
           <reuse-address>true</reuse-address>
        </member-server-socket-endpoint-config>
    </advanced-network>
    ...
</hazelcast>
hazelcast:
  advanced-network
    enabled: true
    member-server-socket-endpoint-config:
    port:
      auto-increment: true
      port-count: 100
      port: 5701
    outbound-ports:
      - 33000-35000
      - 37000,37001,37002,37003
      - 38000,38500-38600
    interfaces:
      enabled: true
      interfaces:
        - 10.10.1.*
    ssl:
      enabled: true
      factory-class-name: com.hazelcast.examples.MySSLContextFactory
      properties:
        foo: bar
    symmetric-encryption:
      algorithm: ALGO
      salt: SALT
      password: PASS
      iteration-count: 10000
    socket-interceptor:
      enabled: true
      class-name: com.hazelcast.examples.MySocketInterceptor
      properties:
        foo: bar
    socket-options:
      buffer-direct: true
      tcp-no-delay: true
      keep-alive: true
      connect-timeout-seconds: 64
      send-buffer-size-kb: 25
      receive-buffer-size-kb: 33
      linger-seconds: 99
    public-address: dummy
    reuse-address: true

When using the declarative configuration, specific element names introduce the server socket endpoint configuration for each protocol:

  • member-server-socket-endpoint-config for MEMBER protocol

  • client-server-socket-endpoint-config for CLIENT protocol

  • rest-server-socket-endpoint-config for REST endpoint

  • memcache-server-socket-endpoint-config for MEMCACHE endpoint

  • wan-server-socket-endpoint-config for WAN endpoints

When using the programmatic configuration, corresponding methods set the respective server socket endpoint configuration:

        config.getAdvancedNetworkConfig().setMemberEndpointConfig(
                new ServerSocketEndpointConfig()
                    .setPort(5701)
                    .setPortAutoIncrement(false)
                    .setSSLConfig(new SSLConfig())
                    .setReuseAddress(true)
                    .setSocketTcpNoDelay(true)
        );

Setting Up REST Server Socket Endpoint Configuration

In addition to the common server socket configuration described above, the REST endpoint configuration includes certain additional elements which are used to enable/disable the REST functionality groups.

        config.getAdvancedNetworkConfig().setRestEndpointConfig(
                new RestServerEndpointConfig()
                    .setPort(8080)
                    .setPortAutoIncrement(false)
                    .enableGroups(WAN, CLUSTER_READ, HEALTH_CHECK)
        );

The following is the equivalent declarative configuration:

  • XML

  • YAML

<hazelcast>
    ...
    <advanced-network enabled="true">
        <rest-server-socket-endpoint-config>
            <port auto-increment="false">8080</port>
            <endpoint-groups>
                <endpoint-group name="WAN" enabled="true"/>
                <endpoint-group name="CLUSTER_READ" enabled="true"/>
                <endpoint-group name="HEALTH_CHECK" enabled="true"/>
            </endpoint-groups>
        </rest-server-socket-endpoint-config>
    </advanced-network>
    ...
</hazelcast>
hazelcast:
  advanced-network:
    enabled: true
    rest-server-socket-endpoint-config:
      port:
        auto-increment: false
        port: 8080
      endpoint-groups:
        WAN:
          enabled: true
        CLUSTER_READ:
          enabled: true
        HEALTH_CHECK:
          enabled: true

Setting Up WAN Endpoints Configuration

Multiple WAN endpoint configurations can be defined to configure the outgoing connections and server sockets, depending on the role of the member in the WAN replication. See the Securing the Connections for WAN Replication section for the configuration examples.

Advanced Network Configuration FAQ

  1. Can I multiplex protocols on a single advanced network endpoint? For example, can I use a single server socket to listen for MEMBER and CLIENT protocols?

    No, each endpoint configuration that defines a server socket must bind to a different socket address.

  2. Can I mix unisocket and advanced network members in the same cluster?

    No, the results will be undefined.

  3. Can I configure multiple server socket endpoints for the same protocol?

    You can only configure multiple server socket endpoints for WAN protocol. For other protocols (MEMBER, CLIENT, REST, MEMCACHE), a single server socket can be configured.

lifebuoy

Help and support