A newer version of IMDG is available.

View latest

Want to try Hazelcast Platform?

We’ve combined the in-memory storage of IMDG with the stream processing power of Jet to bring you the all new Hazelcast Platform.

Cluster Utilities

This section provides information on the Hazelcast command line and other programmatic utilities you can use to listen to the cluster events, to change the state of your cluster, to check whether the cluster and/or members are safe before shutting down a member and to define the minimum number of cluster members required for the cluster to remain up and running. It also gives information on the Hazelcast Lite Member.

Hazelcast Command Line Tool

This is a tool using which you can install and run Hazelcast IMDG and Management Center on your Unix-like local environments. You need JRE 8 or newer as a prerequisite.

This tool comes with your Hazelcast IMDG download package. When you extract the package, you see the "hazelcast-command-line" directory.

To install and start using the tool, follow these steps:

  1. Run the following commands in the extracted IMDG directory:

    cd hazelcast-command-line/distro
    make
  2. When the make command finishes, run the following commands:

    cd build/dist/bin
    ./hz

You are now ready to use the tool.

  • Starting a standalone Hazelcast member with the default configuration:

    ./hz start *

  • Starting Hazelcast Management Center:

    ./hz mc start

Please see the tool’s documentation for all the other usages.

Using the cluster.sh Script

You can use the script cluster.sh, which comes with the Hazelcast package, to get/change the state of your cluster, to shutdown your cluster and to force your cluster to clean its persisted data and make a fresh start. The latter is the Force Start operation of Hazelcast’s Hot Restart Persistence feature. See the Force Start section.

The script cluster.sh uses curl command and curl must be installed to be able to use the script.

The script cluster.sh takes the following parameters to operate according to your needs. If these parameters are not provided, the default values are used.

Parameter Default Value Description

-o or --operation

get-state

Executes a cluster-wide operation. Operations can be the following:

  • IMDG Open Source operations: get-state, change-state, shutdown and get-cluster-version.

  • IMDG Enterprise operations: force-start, partial-start and change-cluster-version.

-s or --state

None

Updates the state of the cluster to a new state. New state can be active, no_migration, frozen, passive. This is used with the operation change-state. This parameter has no default value; when you use this, you should provide a valid state.

-a or --address

127.0.0.1

Defines the IP address of a cluster member. If you want to manage your cluster remotely, you should use this parameter to provide the IP address of a member to this script.

-p or --port

5701

Defines on which port Hazelcast is running on the local or remote machine.

-c or --clustername

dev

Defines the name of a cluster which is used for a simple authentication. See the Creating Clusters section.

-P or --password

dev-pass

Defines the password of a cluster (valid only for Hazelcast releases older than 3.8.2). See the Creating Clusters section.

-v or --version

no argument expected

Defines the cluster version to change to. It is used in conjunction with the change-cluster-version operation.

-d or --debug

no argument expected

Prints error output.

--https

no argument expected

Uses HTTPS protocol for REST calls.

--cacert

set of well-known CA certificates

Defines trusted PEM-encoded certificate file path. It’s used to verify member certificates.

--cert

None

Defines PEM-encoded client certificate file path. Only needed when client certificate authentication is used.

--key

None

Defines PEM-encoded client private key file path. Only needed when client certificate authentication is used.

--insecure

no argument expected

Disables member certificate verification.

The script cluster.sh is self-documented; you can see the parameter descriptions using the command ./cluster.sh -h or ./cluster.sh --help.

You can perform the above operations using the Hot Restart tab of Hazelcast Management Center or using the REST API. See the Hot Restart and Using REST API for Cluster Management sections in the Hazelcast Management Center documentation.

Example Usages for cluster.sh

Let’s say you have a cluster running on remote machines and one Hazelcast member is running on the IP 172.16.254.1 and on the port 5702. The cluster name and password of the cluster are test and test.

Getting the cluster state:

To get the state of the cluster, use the following command:

./cluster.sh -o get-state -a 172.16.254.1 -p 5702 -g test -P test

The following also gets the cluster state, using the alternative parameter names, e.g., --port instead of -p:

./cluster.sh --operation get-state --address 172.16.254.1 --port 5702 --clustername test --password test

Changing the cluster state:

To change the state of the cluster to frozen, use the following command:

./cluster.sh -o change-state -s frozen -a 172.16.254.1 -p 5702 -g test -P test

Similarly, you can use the following command for the same purpose:

./cluster.sh --operation change-state --state frozen --address 172.16.254.1 --port 5702 --clustername test --password test

Shutting down the cluster:

To shutdown the cluster, use the following command:

./cluster.sh -o shutdown -a 172.16.254.1 -p 5702 -g test -P test

Similarly, you can use the following command for the same purpose:

./cluster.sh --operation shutdown --address 172.16.254.1 --port 5702 --clustername test --password test

Partial starting the cluster:

To partial start the cluster when Hot Restart is enabled, use the following command:

./cluster.sh -o partial-start -a 172.16.254.1 -p 5702 -g test -P test

Similarly, you can use the following command for the same purpose:

./cluster.sh --operation partial-start --address 172.16.254.1 --port 5702 --clustername test --password test

Force starting the cluster:

To force start the cluster when Hot Restart is enabled, use the following command:

./cluster.sh -o force-start -a 172.16.254.1 -p 5702 -g test -P test

Similarly, you can use the following command for the same purpose:

./cluster.sh --operation force-start --address 172.16.254.1 --port 5702 --clustername test --password test

Getting the current cluster version:

To get the cluster version, use the following command:

./cluster.sh -o get-cluster-version -a 172.16.254.1 -p 5702 -g test -P test

The following also gets the cluster state, using the alternative parameter names, e.g., --port instead of -p:

./cluster.sh --operation get-cluster-version --address 172.16.254.1 --port 5702 --clustername test --password test

Changing the cluster version:

See the Rolling Member Upgrades chapter to learn more about the cases when you should change the cluster version.

To change the cluster version to X.Y, use the following command:

./cluster.sh -o change-cluster-version -v X.Y -a 172.16.254.1 -p 5702 -g test -P test

The cluster version is always in the major.minor format, e.g., 3.12. Using other formats results in a failure.

Calls against the TLS protected members (using HTTPS protocol):

When the member has TLS configured, use the --https argument to instruct cluster.sh to use the proper URL scheme:

./cluster.sh --https \
  --operation get-state --address member1.example.com --port 5701

If the default set of trusted certificate authorities is not sufficient, e.g, you use a self-signed certificate, you can provide a custom file with the root certificates:

./cluster.sh --https \
  --cacert /path/to/ca-certs.pem \
  --operation get-state --address member1.example.com --port 5701

When the TLS mutual authentication is enabled, you have to provide the client certificate and related private key:

./cluster.sh --https \
  --key privkey.pem \
  --cert cert.pem \
  --operation get-state --address member1.example.com --port 5701
Currently, this script is not supported on the Windows platforms.

Using REST API for Cluster Management

Besides the Management Center’s Hot Restart tab and the script cluster.sh, you can also use REST API to manage your cluster’s state. The following are the operations you can perform.

Some of the REST calls listed below need their REST endpoint groups to be enabled. See the Using the REST Endpoint Groups section on how to enable them.

Also note that the value of ${PASSWORD} in the following calls is checked only if the security is enabled in Hazelcast IMDG, i.e., if you have Hazelcast IMDG Enterprise Edition. If the security is disabled, the ${PASSWORD} can be left empty.

Table 1. REST API calls

IMDG Open Source commands

  • Checking if a member is ready to be used:

    When a member joins the cluster, you can check whether it is ready to be used with the following HTTP call. It should return the 200 status code, meaning that the member can be safely used. Otherwise, it returns the 503 status code indicating the member is not available yet. Only HTTP GET request method is supported.

    curl http://127.0.0.1:${PORT}/hazelcast/health/ready
  • Getting the cluster state:

    To get the state of the cluster, use the following command:

    curl --data "${CLUSTERNAME}&$\{PASSWORD}" http://127.0.0.1:${PORT}/hazelcast/rest/management/cluster/state
  • Changing the cluster state:

    To change the state of the cluster to frozen, use the following command:

    curl --data "${CLUSTERNAME}&$\{PASSWORD}&${STATE}" http://127.0.0.1:${PORT}/hazelcast/rest/management/cluster/changeState
  • Shutting down the cluster:

    To shutdown the cluster, use the following command:

    curl --data "${CLUSTERNAME}&$\{PASSWORD}"  http://127.0.0.1:${PORT}/hazelcast/rest/management/cluster/clusterShutdown
  • Querying the current cluster version:

    To get the current cluster version, use the following curl command:

    curl http://127.0.0.1:${PORT}/hazelcast/rest/management/cluster/version
      {"status":"success","version":"3.9"}

IMDG Enterprise commands

  • Partial starting the cluster:

    To partial start the cluster when Hot Restart is enabled, use the following command:

    curl --data "${CLUSTERNAME}&$\{PASSWORD}" http://127.0.0.1:${PORT}/hazelcast/rest/management/cluster/partialStart/
  • Force starting the cluster:

    To force start the cluster when Hot Restart is enabled, use the following command:

    curl --data "${CLUSTERNAME}&$\{PASSWORD}" http://127.0.0.1:${PORT}/hazelcast/rest/management/cluster/forceStart/
    You can also perform the above operations (partialStart and forceStart) using the Hot Restart tab of Hazelcast Management Center or using the script cluster.sh. See the Hot Restart and cluster.sh sections.
  • Initiating Hot Backup:

    To initiate the Hot Backup, use the following curl command:

    curl --data "${CLUSTERNAME}&$\{PASSWORD}" http://127.0.0.1:${PORT}/hazelcast/rest/management/cluster/hotBackup
  • Changing the cluster version:

    To upgrade the cluster version, after having upgraded all members of your cluster to a new minor version, use the following curl command:

    curl --data "${CLUSTERNAME}&$\{PASSWORD}&${CLUSTER_VERSION}" http://127.0.0.1:${PORT}/hazelcast/rest/management/cluster/version

    For example, assuming the default cluster name and password, issue the following command to any member of the cluster to upgrade from cluster version 3.8 to 3.9:

    curl --data "dev&dev-pass&3.9" http://127.0.0.1:5701/hazelcast/rest/management/cluster/version
      {"status":"success","version":"3.9"}
    You can also perform the above cluster version operations using Hazelcast Management Center or using the script cluster.sh. See the Rolling Member Upgrades and cluster.sh sections.

Enabling Lite Members

Lite members are the Hazelcast cluster members that do not store data. These members are used mainly to execute tasks and register listeners and they do not have partitions.

You can form your cluster to include the regular Hazelcast members to store data and Hazelcast lite members to run heavy computations. The presence of the lite members do not affect the operations performed on the other members in the cluster. You can directly submit your tasks to the lite members, register listeners on them and invoke operations for the Hazelcast data structures on them such as map.put() and map.get().

If you want to use lite members in a Hazelcast IMDG Enterprise cluster, they are also subjected to the Enterprise license.

Configuring Lite Members

You can enable a cluster member to be a lite member using declarative or programmatic configuration.

Declarative Configuration:

  • XML

  • YAML

<hazelcast>
    ...
    <lite-member enabled="true"/>
    ...
</hazelcast>
hazelcast:
  lite-member:
    enabled: true

Programmatic Configuration:

Config config = new Config();
config.setLiteMember(true);

Promoting Lite Members to Data Member

Lite members can be promoted to data members using the Cluster interface. When they are promoted, cluster partitions are rebalanced and ownerships of some portion of the partitions are assigned to the newly promoted data members.

Config config = new Config();
config.setLiteMember(true);

HazelcastInstance hazelcastInstance = Hazelcast.newHazelcastInstance(config);
Cluster cluster = hazelcastInstance.getCluster();
cluster.promoteLocalLiteMember();
A data member cannot be downgraded to a lite member back.

Getting Member Events and Member Sets

Hazelcast allows you to register for membership events so that you are notified when members are added or removed. You can also get the set of cluster members.

The following example code does the above: registers for member events, notifies when members are added or removed and gets the set of cluster members.

public class ExampleGetMemberEventsAndSets {

    public static void main(String[] args) {
        HazelcastInstance hazelcastInstance = Hazelcast.newHazelcastInstance();
        Cluster cluster = hazelcastInstance.getCluster();
        cluster.addMembershipListener( new MembershipListener() {
            public void memberAdded( MembershipEvent membershipEvent ) {
                System.out.println( "MemberAdded " + membershipEvent );
            }

            public void memberRemoved( MembershipEvent membershipEvent ) {
                System.out.println( "MemberRemoved " + membershipEvent );
            }
        } );

        Member localMember  = cluster.getLocalMember();
        System.out.println ( "my inetAddress= " + localMember.getInetAddress() );

        Set setMembers  = cluster.getMembers();
        for ( Member member : setMembers ) {
            System.out.println( "isLocalMember " + member.localMember() );
            System.out.println( "member.inetaddress " + member.getInetAddress() );
            System.out.println( "member.port " + member.getPort() );
        }
    }
}
See the Membership Listener section for more information on membership events.

Managing Cluster and Member States

This section explains the states of Hazelcast clusters and members which you can use to allow or restrict the designated cluster/member operations.

Cluster States

By changing the state of your cluster, you can allow/restrict several cluster operations or change the behavior of those operations. You can use the methods changeClusterState() and shutdown() which are in the Cluster interface to change your cluster’s state.

Hazelcast clusters have the following states:

  • ACTIVE: This is the default cluster state. Cluster continues to operate without restrictions.

  • NO_MIGRATION:

    • In this state, there is no data movement between Hazelcast members. It means that when there is a member crash or a new member in the cluster, there won’t be any partition rebalancing, partition backup replica creation or migration.

      Please note that promoting a backup replica to the primary replica is a local operation and does not involve any data movement between cluster members. Hence, backup promotions occur on member crashes when the cluster is in this mode. Upon a member crash, all other members that keep backup replicas of the crashed member promote backup replicas to the primary replica role and restore availability. However, there is a limitation here. Since the maximum number of backups is 6, if you lose 7 members in your large cluster, you can lose availability of the partitions whose primary and backup replicas are mapped to those crashed members.

    • The cluster accepts new members.

    • All other operations are allowed.

    • You cannot change the state of a cluster to NO_MIGRATION when migration/replication tasks are being performed.

    • When you want to add multiple new members to the cluster, you can first change the cluster state to NO_MIGRATION, then start the new members. Once all of them join to the cluster, you can change the cluster state back to ACTIVE. Then, the cluster rebalances partition replica distribution at once.

  • FROZEN:

    • In this state, the partition table is frozen and partition assignments are not performed.

    • The cluster does not accept new members.

    • If a member leaves, it can join back. Its partition assignments (both primary and backup replicas) remain the same until either it joins back or the cluster state is changed to ACTIVE. When it joins back to the cluster, it owns all previous partition assignments as it was. On the other hand, when the cluster state changes to ACTIVE, re-partitioning starts and unassigned partition replicas are assigned to the active members.

    • All other operations in the cluster, except migration, continue without restrictions.

    • You cannot change the state of a cluster to FROZEN when migration/replication tasks are being performed.

    • You can make use of FROZEN state along with the Hot Restart Persistence feature. You can change the cluster state to FROZEN, then restart some of your members using the Hot Restart feature. The data on the restarting members will not be accessible but you will be able to access to the data that is stored in other members. Basically, FROZEN cluster state allows you do perform maintenance on your members with degrading availability partially.

  • PASSIVE:

    • In this state, the partition table is frozen and partition assignments are not performed.

    • The cluster does not accept new members.

    • If a member leaves while the cluster is in this state, the member will be removed from the partition table if cluster state moves back to ACTIVE.

    • This state rejects ALL operations immediately EXCEPT the read-only operations like map.get() and cache.get(), replication and cluster heartbeat tasks.

    • You cannot change the state of a cluster to PASSIVE when migration/replication tasks are being performed.

    • You can make use of PASSIVE state along with the Hot Restart Persistence feature. See the Cluster Shutdown API for more info.

  • IN_TRANSITION:

    • This state shows that the state of the cluster is in transition.

    • You cannot set your cluster’s state as IN_TRANSITION explicitly.

    • It is a temporary and intermediate state.

    • During this state, your cluster does not accept new members and migration/replication tasks are paused.

All in-cluster methods are fail-fast, i.e., when a method fails in the cluster, it throws an exception immediately (it is not retried): when there is an error during a state transition, that error is propagated immediately, Hazelcast does not attempt to retry the transition in this case.

The following snippet is from the Cluster interface showing the methods used to manage your cluster’s states.

public interface Cluster {
    ClusterState getClusterState();
    void changeClusterState(ClusterState newState);
    void changeClusterState(ClusterState newState, TransactionOptions transactionOptions);
    void shutdown();
    void shutdown(TransactionOptions transactionOptions);
}

See the Cluster interface Javadoc for information on these methods.

Cluster Member States

Hazelcast cluster members have the following states:

  • ACTIVE: This is the initial member state. The member can execute and process all operations. When the state of the cluster is ACTIVE or FROZEN, the members are in the ACTIVE state.

  • PASSIVE: In this state, member rejects all operations EXCEPT the read-only ones, replication and migration operations, heartbeat operations and the join operations as explained in the Cluster States section above. A member can go into this state when either of the following happens:

    1. Until the member’s shutdown process is completed after the method Node.shutdown(boolean) is called. Note that, when the shutdown process is completed, member’s state changes to SHUT_DOWN.

    2. Cluster’s state is changed to PASSIVE using the method changeClusterState().

  • SHUT_DOWN: A member goes into this state when the member’s shutdown process is completed. The member in this state rejects all operations and invocations. A member in this state cannot be restarted.

Defining Member Attributes

You can define various member attributes on your Hazelcast members. You can use these member attributes to tag your members as may be required by your business logic.

To define a member attribute on a member, you can:

  • provide MemberAttributeConfig to your Config object

  • or provide the member attributes at runtime via attribute setter methods on the Member interface.

For example, you can tag your members with their CPU characteristics and you can route CPU intensive tasks to those CPU-rich members. Here is how you can do it:

public class ExampleMemberAttributes {

    public static void main(String[] args) {
        MemberAttributeConfig fourCore = new MemberAttributeConfig();
        memberAttributeConfig.setAttribute( "CPU_CORE_COUNT", "4" );
        MemberAttributeConfig twelveCore = new MemberAttributeConfig();
        memberAttributeConfig.setAttribute( "CPU_CORE_COUNT", "12" );
        MemberAttributeConfig twentyFourCore = new MemberAttributeConfig();
        memberAttributeConfig.setAttribute( "CPU_CORE_COUNT", "24" );

        Config member1Config = new Config();
        config.setMemberAttributeConfig( fourCore );
        Config member2Config = new Config();
        config.setMemberAttributeConfig( twelveCore );
        Config member3Config = new Config();
        config.setMemberAttributeConfig( twentyFourCore );

        HazelcastInstance member1 = Hazelcast.newHazelcastInstance( member1Config );
        HazelcastInstance member2 = Hazelcast.newHazelcastInstance( member2Config );
        HazelcastInstance member3 = Hazelcast.newHazelcastInstance( member3Config );

        IExecutorService executorService = member1.getExecutorService( "processor" );

        executorService.execute( new CPUIntensiveTask(), new MemberSelector() {
            @Override
            public boolean select(Member member) {
                int coreCount = Integer.parseInt(member.getAttribute( "CPU_CORE_COUNT" ));
                // Task will be executed at either member2 or member3
                if ( coreCount > 8 ) {
                    return true;
                }
                return false;
            }
        } );

        HazelcastInstance member4 = Hazelcast.newHazelcastInstance();
        // We can also set member attributes at runtime.
        member4.setAttribute( "CPU_CORE_COUNT", "2" );
    }
}

For another example, you can tag some members with a filter so that a member in the cluster can load classes from those tagged members. See the User Code Deployment section for more information.

You can also define your member attributes through declarative configuration and start your member afterwards. Here is how you can use the declarative approach:

  • XML

  • YAML

<hazelcast>
    ...
    <member-attributes>
        <attribute name="CPU_CORE_COUNT">4</attribute-name>
    </member-attributes>
    ...
</hazelcast>
hazelcast:
  member-attributes:
    CPU_CORE_COUNT:
      type: int
      value: 4

Safety Checking Cluster Members

To prevent data loss when shutting down a cluster member, Hazelcast provides a graceful shutdown feature. You perform this shutdown by calling the method HazelcastInstance.shutdown().

The oldest cluster member migrates all of the replicas owned by the shutdown-requesting member to the other running (not initiated shutdown) cluster members. After these migrations are completed, the shutting down member will not be the owner or a backup of any partition anymore. It means that you can shutdown any number of Hazelcast members in a cluster concurrently with no data loss.

Please note that the process of shutting down members waits for a predefined amount of time for the oldest member to migrate their partition replicas. You can specify this graceful shutdown timeout duration using the property hazelcast.graceful.shutdown.max.wait. Its default value is 10 minutes. If migrations are not completed within this duration, shutdown may continue non-gracefully and lead to data loss. Therefore, you should choose your own timeout duration considering the size of data in your cluster.

Ensuring Safe State with PartitionService

With the improvements in graceful shutdown procedure in Hazelcast 3.7, the following methods are not needed to perform graceful shutdown. Nevertheless, you can use them to check the current safety status of the partitions in your cluster.

public interface PartitionService {
   ...
   ...
    boolean isClusterSafe();
    boolean isMemberSafe(Member member);
    boolean isLocalMemberSafe();
    boolean forceLocalMemberToBeSafe(long timeout, TimeUnit unit);
}

The method isClusterSafe checks whether the cluster is in a safe state. It returns true if there are no active partition migrations and all backups are in sync for each partition.

The method isMemberSafe checks whether a specific member is in a safe state. It checks if all backups of partitions of the given member are in sync with the primary ones. Once it returns true, the given member is safe and it can be shut down without data loss.

Similarly, the method isLocalMemberSafe does the same check for the local member. The method forceLocalMemberToBeSafe forces the owned and backup partitions to be synchronized, making the local member safe.

See here for more PartitionService code samples.