Hazelcast Enterprise Feature
This chapter explains the procedure of upgrading the version of Hazelcast members in a running cluster without interrupting the operation of the cluster.
Minor version: A version change after the decimal point, e.g., 5.1 and 5.2.
Patch version: A version change after the second decimal point, e.g., 5.2.1 and 5.2.2.
Member codebase version: The
major.minor.patchversion of the Hazelcast binary on which the member executes. For example, when running on
hazelcast-5.2.jar, your member’s codebase version is
Cluster version: The
major.minorversion at which the cluster operates. This ensures that cluster members are able to communicate using the same cluster protocol and determines the feature set exposed by the cluster.
Hazelcast members operating on binaries of the same major and minor
version numbers are compatible regardless of patch version.
For example, in a cluster with members running on version 5.2.1,
it is possible to perform a rolling upgrade to 5.2.2 by shutting
down, upgrading to
hazelcast-5.2.2.jar binary and starting each
member one by one. Rolling upgrade for patch versions
is supported in the open source and Enterprise editions of Hazelcast.
Also, each minor version is compatible with the previous one. Rolling upgrade for minor versions is supported in the Enterprise edition of Hazelcast.
The compatibility guarantees described above are given in the context of rolling member upgrades and only apply to GA (general availability) releases. It is never advisable to run a cluster with members running on different patch or minor versions for prolonged periods of time.
|The version numbers used in this chapter are examples.|
Let’s assume a cluster with four members running on codebase version
5.1.0 with cluster version
5.1, that should be upgraded to codebase version
5.2.0 and cluster version
5.2. The rolling upgrade process for this cluster,
i.e., replacing existing
5.1.0 members one by one with an upgraded
one at version
5.2.0, includes the following steps which should be repeated for each member:
Gracefully shut down an existing
Wait until all partition migrations are completed; during migrations, membership changes (member joins or removals) are not allowed.
Update the member with the new
Start the member and wait until it joins the cluster. You should see something like the following in your logs:
... INFO: [192.168.2.2]:5701 [cluster] [5.2] Hazelcast Enterprise 5.2 (20170630 - a67dc3a) starting at [192.168.2.2]:5701 ... INFO: [192.168.2.2]:5701 [cluster] [5.2] Cluster version set to 5.1
The version in brackets (
[5.2]) still denotes the member’s codebase version
(running on the hypothetical
Once the member locates the existing cluster members, it sends its join request to the master.
The master validates that the new member is allowed to join the cluster and
lets the new member know that the cluster is currently operating at
5.1 cluster version.
The new member sets
5.1 as its cluster version and starts operating normally.
At this point all members of the cluster have been upgraded to codebase version
but the cluster still operates at cluster version
5.1. In order to use
the cluster version must be changed to
|Rolling upgrade can be used for one version at a time, e.g., 4.n to 4.n+1. You cannot upgrade your members, for example, from 5.1 to 5.3 in a single rolling upgrade session.|
You have the following options to upgrade the cluster version:
Note that you need to enable the REST API to use either of the above methods
to upgrade your cluster version. For this, enable the
REST endpoint group (its default is disabled). See the
Using the REST Endpoint Groups section section on how to enable them.
Also note that you need to upgrade your Management Center version before upgrading the member version if you want to change the cluster version using Management Center. Management Center is compatible with the previous minor version of Hazelcast. For example, Management Center 5.2 works with both Hazelcast 5.1 and 5.2. To change your cluster version to 5.2, you need Management Center 5.2.
The cluster can automatically upgrade its version. As soon as it detects
that all its members have a version higher than the current cluster
version, it upgrades the cluster version to match it. This feature is
disabled by default. To enable it, set the system property
There is one tricky detail here: as you are shutting down and upgrading
the members one by one, when you shut down the last one, all the members
in the remaining cluster have the newer version, but you don’t want the
auto-upgrade to kick in before you have successfully upgraded the last
member as well. To avoid this, you can use the
property. You should
set it to the size of your cluster, and then Hazelcast will wait for the
last member to join before it can proceed with the auto-upgrade.
In the event of network partitions which split your cluster into two subclusters, split-brain handling works as explained in the Network Partitioning chapter, with the additional constraint that two subclusters only merge as long as they operate on the same cluster version. This is a requirement to ensure that all members participating in each one of the subclusters are able to operate as members of the merged cluster at the same cluster version.
With regards to rolling upgrades, the above constraint implies that if a network partition occurs while a change of cluster version is in progress, then with some unlucky timing, one subcluster may be upgraded to the new cluster version and another subcluster may have upgraded members but still operate at the old cluster version.
In order for the two subclusters to merge, it is necessary to change the cluster version of the subcluster that still operates on the old cluster version, so that both subclusters will be operating at the same, upgraded cluster version and able to merge as soon as the network partition is fixed.
The following provide answers to the frequently asked questions related to rolling member upgrades.
How is the cluster version set?
When a new member starts, it is not yet joined to a cluster; therefore its cluster version is still undetermined. In order for the cluster version to be set, one of the following must happen:
the member cannot locate any members of the cluster to join or is configured without a joiner: in this case, the member appoints itself as the master of a new single-member cluster and its cluster version is set to the
major.minorversion of its own codebase version. So a standalone member running on codebase version
5.2.0sets its own cluster version to
the member that is starting locates members of the cluster and identifies which is the master: in this case, the master validates that the joining member’s codebase version is compatible with the current cluster version. If it is found to be compatible, then the member joins and the master sends the cluster version, which is set on the joining member. Otherwise, the starting member fails to join and shuts down.
What if a new Hazelcast minor version changes fundamental cluster protocol communication, like join messages?
|The version numbers used in the paragraph below are only used as an example.|
On startup, as answered in the above question (How is the cluster version set?),
the cluster version is not yet known to a member that has not joined any cluster.
By default the newly started member uses the cluster protocol that corresponds to
its codebase version until this member joins a cluster
(so for codebase
5.2.0 this means implicitly assuming cluster version
If, hypothetically, major changes in discovery & join operations
have been introduced which do not allow the member to join a
then the member should be explicitly configured to start
5.1 cluster version.
Do I have to upgrade clients to work with rolling upgrades?
Clients which implement the Open Binary Client Protocol are compatible with Hazelcast version 3.6 and newer minor versions. Thus older client versions are compatible with next minor versions. Newer clients connected to a cluster operate at the lower version of capabilities until all members are upgraded and the cluster version upgrade occurs.
Can I stop and start multiple members at once during a rolling member upgrade?
It is not recommended due to potential network partitions. It is advised to always stop and start one member in each upgrade step.
Can I upgrade my business app together with Hazelcast while doing a rolling member upgrade?
Yes, but make sure to make the new version of your app compatible with the old one since there will be a timespan when both versions interoperate. Checking if two versions of your app are compatible includes verifying binary and algorithmic compatibility and some other steps.
It is worth mentioning that a business app upgrade is orthogonal to a rolling member upgrade. A rolling business app upgrade may be done without upgrading the members.